Shear Lag and Plate Buckling in Plated Structures (EN 1993-1-5)
This article explains the concept of shear lag and plate buckling in plated structures as espouses in EN 1993-1-5, and also how to incorporate their effects during analysis...
Tag: Buckling
Design of Steel Angles under Axial Tension and Compression – Worked Example
This article provides a detailed worked example of designing angle steel sections subjected to pure tension and compression in accordance with Eurocode 3. These steel sections serve as...
Second-order Effects in RC Building Frames (Eurocode 2)
Structural engineers analyze all types of structures to determine their displacements and internal forces under various load conditions. They choose between linear and non-linear analysis based on the...
Design of Un-restrained Steel Beam (I-Section) – Worked Example
This article presents a practical worked example on the design of unrestrained steel beam (I-section) to Eurocode 3 The beam to be designed has been analysed using Etabs...
Design of Steel Column (H-Section) to Eurocode 3 – Worked Example
This article presents a worked example on the design of steel column (H-section) subjected to combined Biaxial Bending and axial compression to Eurocode 3 The column to be...
Design of Axially Loaded Steel Members to Eurocode 3 – an overview
Axially loaded steel members are subjected to external loads along the longitudinal axis of the member. These loads either induces pure tension or compression in these members, as...
Design of Reinforced Concrete Column to Eurocode 2 – an overview
Columns are mostly used to transfer loads from superstructure to foundation or to transfer members.