Skip to content
Newspiper light mode logo Newspiper dark mode logo
First Principles Engineering Knowledge

…a repository for civil & structural engineering knowledge

  • Know Who We Are |
  • Run your Design |
  • Read our Articles |
  • Join our community |
  • Privacy Policy |

Tag: Sub-frame

Analysis of Subframe for Column Moment – Worked example
Structural Analysis

Analysis of Subframe for Column Moment – Worked example

Amuletola Rasheed Structural AnalysisPost read time 3 min read May 12, 2024January 18, 2025

In this article, we shall analyze a subframe to generate column moments using moment distribution methodmoment distribution method. The figure below shows the elevation view of a frame...

Amuletola Rasheed
Analysis of Subframe – worked Example
Structural Analysis

Analysis of Subframe – worked Example

Amuletola Rasheed Structural AnalysisPost read time 5 min read March 10, 2024January 25, 2025

In this article, we shall analyze a subframe to generate column moments and support moments in beams using moment distribution method. 

Amuletola Rasheed
Frame Structures: Understanding the concept of Sub-frame
Structural Analysis

Frame Structures: Understanding the concept of Sub-frame

Amuletola Rasheed Structural AnalysisPost read time 3 min read October 12, 2023November 30, 2024

Frames are structures which consist of series of interconnected beams and column. Several structural materials can be used in building a frame. In reinforced concrete frames, the beams...

Amuletola Rasheed
Connect With Me on LinkedIn 👇
Amuletola Rasheed

Recent Posts

  • Introduction to The Structural Eurocodes
  • Deflection of RC BEAM Using Calculation Method – Worked Example
  • Snow Loads (EN 1991-1-3)
  • The Concept of Confined Concrete according to EN 1992-1-1
  • Analysis of Continuous Beam: Comparison between fppSuite, STAAD Pro and Hand Calculation

Recent Comments

  1. Design of a Singly Reinforced Beam to Eurocode on Deflection of RC BEAM Using Calculation Method – Worked Example
  2. Deflection of RC Structures (EN 1992-1-1) - First Principle Engineering Knowledge on Deflection of RC BEAM Using Calculation Method – Worked Example
  3. Eric Jones on Design of a Singly Reinforced Beam to Eurocode 2 – Worked Example
  4. KUUZUME MARTIN on Design of a Singly Reinforced Beam to BS 8110 – Worked Example
  5. XRumerTest on Design of Column to Eurocode 2 using Design Chart – worked example

Archives

Click and Start Running Your Calcs on fppSuite
Click and Start Running Your Calcs on fppSuite
Join Our Telegram Channel
Join Our Telegram Channel
Connect with engineers discussing Eurocodes, design tips, and worked examples.
Designed by Nasio Themes || Powered by WordPress