Design of Un-restrained Steel Beam (I-Section) – Worked Example
This article presents a practical worked example on the design of unrestrained steel beam (I-section) to Eurocode 3 The beam to be designed has been analysed using Etabs...
Tag: Beam Design
Lateral Torsional Buckling of Steel Beams
This article presents an overview on the design of structural steel beams for lateral torsional buckling to EN 1993-1-1-2005, and the UK National Annex to EN 1993-1-1-2005. For...
Design of Steel Beam to Eurocode 3 – an overview
This article presents an overview on the design of Structural Steel sections in bending to EN 1993 -1-1:2005 (Eurocode 3) and the UK National Annex to EN 1993...
Design of RC Flange beam to BS 8110 – Worked Example
This article presents a work example on the design of flanged beam to BS 8110-1-1997. The Beam 2 (shown in the plan below) that shall be designed here...
Design of Reinforced Concrete Flange Beam to Eurocode 2 – Worked Example
This article presents a worked example on the design of reinforced concrete flange beam to EC2.
Design of Flange Beams to Eurocode 2: an Overview
A flange section is that which has a rectangular extension from the main rectangular body. The extension is called a flange while the rectangular body is called web....
Design of Flange Beam to BS 8110: an Overview
A flange section is that which has a rectangular extension from the main rectangular body. The extension is called a flange while the rectangular body is called web....
Design of a Doubly Reinforced Beam to BS 8110 – Worked example
This article presents a worked example on the design of doubly reinforced beam to BS 8110
Design of a Doubly Reinforced Beam to Eurocode 2 – Worked Example
This article presents a worked example on the design of doubly reinforced beam to EC2
Design of a Singly Reinforced Beam to BS 8110 – Worked Example
This article presents a worked example of the design of singly reinforced concrete beam to BS 8110.
Design of a Singly Reinforced Beam to Eurocode 2 – Worked Example
This article presents a worked example of the design of singly reinforced concrete beam to EC2. The image below shows the Plan view of a reinforced concrete structure,...
Design of Reinforced Concrete Beam to Eurocode 2 – an overview
The approach to designing reinforced concrete beam to EC2 is to design for ultimate limit state and check whether serviceability limit state criteria are met. The foremost of...
Design of Reinforced Concrete Beam to BS 8110:1:1997: an Overview
The design approach to designing reinforced concrete beam to BS 8110:1:1997 is to design for ultimate limit state and check whether serviceability limit state criteria are met. The...